products

Rhizosp'air

Rhizosph’Air® – Patented wastewater treatment without primary settling, with minimal sludge production and low greenhouse gas emissions

Rhizosph’Air® is an innovative, energy-efficient treatment system for raw wastewater that is applied directly to the filter – without a primary clarifier or septic tank. The system combines a vertical and horizontal treatment stage, both with an unsaturated and a saturated aerated zone, resulting in high treatment efficiency with low energy consumption and a minimal ecological footprint.

Patented technology

The Rhizosph’Air® system is patented under number EP3286147 and is a joint development of Rietland (Belgium), Naturally Wallace Consulting (USA) and SAVEA (France). The patent concerns the unique combination of an unsaturated filtration layer with a saturated, aerated zone, allowing raw wastewater to be treated directly without primary settling.

No primary settling, no septic tank – but a composting sludge layer

Unlike conventional systems, which require a septic tank or primary clarifier, in Rhizosph’Air® the raw wastewater is pumped directly onto the filters. On the filter surface, a natural, composting sludge layer forms that:

grows only about 1 cm per year,

only needs to be removed once every 10 to 12 years,

ensures stable and robust operation, even under fluctuating loads.

Preventing methane emissions – a climate-smart choice

Septic tanks and primary settling tanks are worldwide a major source of methane (CH₄), a very powerful greenhouse gas that is dozens of times more harmful than CO₂. By eliminating the need for primary settling and treating the wastewater directly in an aerated system, methane formation is largely avoided. Rhizosph’Air® thus actively contributes to the reduction of greenhouse gas emissions in the wastewater chain.

How does Rhizosph’Air® work?

The system consists of two main components:

An unsaturated filtration layer (0.8 – 1.2 m²/PE, divided over 2 filters) that provides initial removal of organic matter (up to 60% of COD) and leaves sufficient carbon for denitrification.

A saturated and aerated zone, where the remaining organic load is broken down and nitrogen is converted. The retention time is tailored to the desired removal efficiency, with a minimum of 1 day to also handle rain peaks.

High treatment performance

Dozens of reference projects (2016–2022, 25 installations from 100 to 4,500 population equivalents) show that Rhizosph’Air® consistently achieves very low effluent concentrations:

Parameter

Effluent concentration (average)

Removal efficiency

COD

< 30 mg/l

95%

BOD₅

< 4 mg/l

98%

ZS

< 10 mg/l

96%

TKN

< 9 mg/l

88%

TN

< 15 mg/l

80%

These results were validated by independent research (INRAE) and confirmed in practice, including under fluctuating loads and rainy weather (up to 4× dry-weather capacity).

Energy-efficient and maintenance-friendly

Energy consumption: only forced aeration – average 0.2 kWh/m³ treated water (0.5 kWh/kg BOD₅).

Low sludge production thanks to high mineralization of suspended solids – the composting sludge layer grows very slowly.

Simple maintenance: blowers require no special skills; the risk of clogging is actively monitored via pressure loss measurement.

Robust and flexible

Rhizosph’Air® is resistant to:

High hydraulic loads (rain peaks up to >4× dry weather),

Fluctuating pollution levels (both organic and nitrogen),

Applications from domestic wastewater to agro-industrial water (polishing).

Applied in practice

More than 25 WWTPs in France (100–4,500 PE) are successfully operating on Rhizosph’Air®, including larger projects (>1,000 PE). A reference project is also running in Denmark (Hvideland, 125 PE).
In addition, Rhizosph’Air® is used in European research projects such as LIFE INTEXT, H2020 NICE and H2020 MUTISOURCE for water disinfection and reuse.

Choosing Rhizosph’Air® means: a smaller footprint, lower operating costs, stable quality, no methane emissions due to primary settling, minimal sludge removal and a future-proof, climate-conscious treatment system – made possible by a patented technology from Rietland, Naturally Wallace Consulting and SAVEA .

blogs

In the spotlight

In our blogs, we share insights, developments, and practical knowledge about water treatment and circular water use.

contact

How can we help you?

Do you have questions about any of our products or services? Feel free to contact us!