knowledge base

Why should I choose an aerated wetland?

Constructed wetlands offer a natural, robust, and energy-efficient way to treat wastewater.

Constructed wetlands use plants and micro-organisms to break down pollution. For many applications – from domestic wastewater to industrial process water – treatment wetlands are a sustainable choice thanks to their low maintenance needs, long service life, and high operational reliability.

However, there is one major barrier: surface area. A classic, passive treatment wetland requires relatively a lot of space: Surface flow wetland 20m²/PE, Horizontal subsurface flow wetland 5m² and Vertical subsurface flow wetland 3m²/PE. This is because the system depends entirely on natural oxygen supply via diffusion from the atmosphere into the water and supply through plants. To get enough oxygen deep into the filter bed, passive systems must be built shallow and wide. For many locations, that required surface area is simply not available.

An aerated constructed wetland offers an attractive alternative.

By introducing air into the system in a controlled way, the oxygen supply is no longer limited by natural diffusion. As a result, the system can be designed four to ten times smaller than a passive wetlands, without compromising on treatment quality. In addition, aeration makes it possible to adjust the system afterwards. With changing discharges or holiday periods, the aeration can be increased or decreased. This provides flexibility that is lacking in a passive system: there, the design must be perfectly designed  from day one, because adjustment is hardly possible.

Micro-organisms play a central role in both systems. They break down organic matter, nitrogen, and other contaminants. But micro-organisms need oxygen. In passive systems, that oxygen is supplied only naturally, making a large surface area necessary. In active systems - wetlands that are aerated -, oxygen is introduced mechanically via a compressor, allowing the filter bed to be more compact and the biological processes to proceed more intensively.

Differences between passive and active (aerated) wetlands

Feature

Passive wetland 

Active (aerated) wetland 

Oxygen supply

Natural diffusion

Mechanical aeration

Required surface area

Large

4–10× smaller

Possibility to adjust

Hardly any

High (aeration adjustable)

Depth of the system

Shallow

Deeper, standard 1 m

Energy consumption

Very low

Low to moderate

Flexibility with changing load

Limited

High

Complexity

Simple

Slightly more complex

Conclusion

For locations with sufficient space, a passive reed bed remains a reliable and simple solution. But where space is scarce or flexibility is important, an aerated treatment wetland offers clear advantages. Thanks to its compact construction and controllable oxygen supply, it combines the power of natural treatment with the control of modern technology – a forward-looking choice for sustainable water treatment.

Sources

Kadlec & Wallace, Treatment Wetlands, 2nd ed.

IWA Specialist Group on Wetland Systems for Water Pollution Control

blogs

In the spotlight

In our blogs, we share insights, developments, and practical knowledge about water treatment and circular water use.

contact

How can we help you?

Do you have questions about any of our products or services? Feel free to contact us!